Detailed Product Description
Single Side Climbing Formwork
Low Labour Cost
With FWKSCB180 climbing systems, the loads from the fresh concrete pressure
are transferred through the brackets by means of V-strongbacks and
compression braces into the scaffold anchors.
Typical applications for the SCB 180 system are dams, locks,
cooling towers, pier heads, tunnels, and bank vaults.
The formwork is simply tilted backwards when striking takes place.
The 1.80 m wide bracket requires only a minimum of space.
1. Economical and safe anchoring
The M30/D20 climbing cones have been designed especially for
single-sided concreting using SCB180 in dam construction, and to
allow the transfer of high tensile and shear forces into the still
fresh, unreinforced concrete. Without wall-through tie-rods,
finished concrete is perfect.
2. Stable and cost-effective for high loads.
Generous bracket spacing allow large-area formwork units with
optimal utilization of the bearing capacity. This leads to
extremely economical solutions.
3. Simple and flexible planning
With SCB180 single-sided climbing formwork, circular structures can
also be concreted without undergoing any large planning process.
Even use on inclined walls is feasible without any special measures
because additional concrete loads or lifting forces can be safely
transferred into the structure.
4. It is with the advantages of standard design, excellent
applicability and interchangeable.